ConformsTo
IEC60598-1 clause 12.4.1 and Annex D
Defense Wind Test Device (Model:SFT S2-1200)
Application
The device is used to test the lamp perfomance conform to theIEC60598-1 clause 12.4.1 and relevant requirements of annex D.
ConformsTo
IEC60598-1 clause 12.4.1 and Annex D
Specifications
A, Inside the test chamber size：2000x2000x2000mm (height x width x depth) (other size options）
B, Outer the test chamber size：2300x2300x2150mm (height x width x depth) (other size options）
C, Diameter of hole：ф1mm -ф2mm, hole area about each overall effective area of about 40%
D, Thickness of the mesh panels：1mm cold ( matt black coating ) double shell rectangular metal structure,
E, Level spacing: 150mm
F, Backplane specifications：L2500mm*W2500mm*H15mm (The size is adjusted according to the outer size),
splicing board, installation of sandwich solid wood flooring
G, Thermal sensor：Φ15X1，Brass sheet 20 units (other quantity options)
H, Power outlet: 16A universal socket (2 units)
I, Door structure: single fan double ( open outwards )
J, Structure: rectangular, with a double-layer perforated shell on the top and four sides
K, Frame type: Mesh plate stamping forming, without affecting ventilation rate
L, Surface spraying: black matte paint
OrderingInformation
SFT S2-1200 Defensewind test device
Below size available:
Inside the test chamber size | Outer the test chamber size |
900*900*900mm | 1200*1200*1050mm |
1000*1000*1000mm | 1300*1300*1150mm |
1200*1200*1200mm | 1500*1500*1350mm |
1500*1500*1500mm | 1800*1800*1650mm |
1800*1800*1800mm | 2100*2100*1950mm |
2000*2000*2000mm | 2300*2300*2150mm |
2200*2200*2200mm | 2500*2500*2350mm |
