Conforms To:
IEC60968-1, IEC60061-3
B22 Lamp Gauge (Model:SFT S1-2701)
Application:
Safequipment offers a wide range ofgauge to meet the most common standards including those from IEC, EN, UL,GB,DIN,VDE and others. Such standards require the checking of size &definition etc. these gauges are constructed from senior stainless steel andappropriate steel with a hardness and a roughness according to standard require.Each gauge is supplied with a certificate of calibration.
Conforms To:
IEC60968-1, IEC60061-3
Specification:
Product Model | Standard | Product Name |
SFT S1-2701 | IEC60061-3,7006-10-8 | "Not Go"gauges for caps on finished lamps BA9,B15,B22&BY22d |
SFT S1-2702 | IEC60061-3,7006-11-8 | "Go"gauges for caps on finished lamps BA9,B15,B22&BY22d |
SFT S1-2703 | IEC60061-3,7006-4A-2 | B22 or B15 Diametrical position of the pin Inserction in lampholder |
SFT S1-2704 | IEC60061-3,7006-4B-1 | B22or B15 Diametrical position of the pin Retention in lampholder |
SFT S1-2705 | IEC60061-3,7006-3-1 | Acceptance gauge for B22d caps intended for automatic wire threading |
SFT S1-2706 | IEC60061-3,7006-19-2 | "Go"gauges for caps B22d-3(90◦/135◦)/25*26 on finished lamps |
SFT S1-2707 | IEC60968 FIG3 | B22d torque test gauges |
SFT S1-2707A | IEC60432-1 Figure C.1 | B22 Test Holder for torque test on lamps with screw caps |
SFT S1-2708 | IEC60360 FIG9 | Approximates dimension of test lampholder for B22/25*26 et B22d-3/25*26 caps |
SFT S1-2708A | IEC60360 FIG13 | Approximates dimension of test lampholder for B22d/22 caps |
SFT S1-2850 | IEC60061-3,7006-12-8 | Plug gauges for lampholders BA21, B15&B22 |
SFT S1-2851 | IEC60061-3,7006-15-7 | Gauges for checking contact position and contact force in bayonet lampholders B22d-3((90◦/135◦) |
SFT S1-2852 | IEC60061-3,7006-20-4 | Plug Gauges for bayonet lampholders B22d-3((90◦/135◦) |
SFT S1-2853 | IEC60061-3,7006-12A-2 | Supplementary "Go" gauges for lampholders B22d & BY22d |
SFT S1-2854 | IEC60061-3,7006-12B-2 | "Not Go" Retention gauges for lampholders B22 |
SFT S1-2855 | IEC60061-3,7006-15A-2 | Gauges for checking contact position and contact force in bayonet lampholders B22d&BY22d |
SFT S1-2856 | IEC60061-3,7006-13-5 | Gauges for slots in lampholders B15d,B22d, B22d-3&BY22d |
SFT S1-2857 | IEC60061-3,7006-17B-1 | Plug gauges for lampholders BY22d |
